Intermatic EH40
<1 min read
We just finished the installation of a new Intermatic EH40 electronic timer for our water heater.
Finding it, in stock, at a local store was probably the toughest part.
The Kroger Co.'s Green Report
<1 min read
The Kroger Co. (QFC, Fred Meyer, Ralphs, Smith's, etc.) has published a "Green Report" (PDF) outlining what they are doing, as well as what their customers can do, to help the environment.
Fred Meyer: 400,000,000 Fewer Plastic Bags
<1 min read
Just got an email from Fred Meyer about using their Reusable Shopping Bags:
Fred Meyer is working with our sister divisions in the Kroger company and our suppliers to reduce excess packaging. For bags, our goal is reducing plastic bag usage by 400,000,000 in 2008. Encouraging Customers like you to use these Reusable Shopping Bags is a good start.
I looked at them a while back. They felt pretty flimsy to me. I'll have too see if they are any better now.
A penny discount for using reusable bags would be nice too.
LaCie Ethernet Disk Mini Firmware Rollback
<1 min read
If you are ever in need to rollback the firmware on your LaCie Ethernet Disk Mini. Here is how to do it…
There are two ways to reset this unit to its default settings:
Web browser method
-Go to the Configuration page in the Web Admin
-Click on the blue button next to Updates
-On the next page, click on the blue button next to Updates Log.
-Click on the "Remove all the updates" link on the bottom-right of the page.
The product should now be reset to its factory default settings.
Hardware method
-When pushing the power button to switch the drive ON, keep holding the power button until the blue LED of the power button starts to flicker and then release the button.
-Then, after 1 or 2 seconds the button's LED should flicker with another rhythm.
-Push the button again. After a few seconds, the LED will flicker again but with a third different rhythm. Release the button.
-If the drive turns off then the power button was held in two long during the last step, please try again if the drive powers off.
The product should now be reset to its factory default settings.
Thanks to Jeff from LaCie's tech support for the info.
I had to rollback because of compatibility problems with the UPnP-AV media server and the latest firmware for my D-Link DSM-520 MediaLounge.