User Tools

Site Tools


tips:linux:cisco675:syslog

Syslog Setup

To enable syslog message logging:

  1. Edit /etc/sysconfig/syslog on the syslog server
  2. Add the -r to the SYSLOGD_OPTIONS variable
  3. Telnet to the modem
  4. Issue the enable command and enter the enable mode password
  5. Issue the following commands:
set syslog enabled
set syslog port 514
set syslog remote <server-ip-address>
write

To view the syslog settings:

show syslog
tips/linux/cisco675/syslog.txt · Last modified: 2009/06/08 15:09 by erik